Intelligent Sweeping Robot Large Water Tank Mobile App Remote Control Planning And Cleaning Line Low Noise 2000 Pa Large Suction

Product Features

1.Bring your own water tank and drag while walking.

2. Intelligent infrared sensing anti-drop

3. It can be remotely controlled by the mobile APP.

4. APP appointments can be launched regularly for up to a week.

5. Increase the battery capacity by 3000 mAh

6. You can increase the wheels and walk the carpet.

7. Increase the power of 8.6W, more power and stronger suction,

8. The touch steering design is more sensitive than the universal wheel steering.

9. Add 3 motors to make it more powerful,

10. Bring your own gyroscope, take the bow-shaped route, and clean it more comprehensively.

11. It can also be cleaned along the side.

Product Specification

1.BATTERY CAPACITY: 3.7V 3000MAH, 13.5WH

2.Net weight: 1105g

3.Gross weight: 1610g

4.Working hours: about 70 minutes – about 80 minutes

5.Charging time: about 4.5 hours (USB)

6. Cleaning area: 150m2

7.Suction: 1500PA

8.Operating voltage: 3.7V

9.Whole unit power: 7.7W

10.Dust box: about 510ML

11.Noise: <70 decibels

12.Clean up garbage: such as soot, melon seed shell, snack debris, dust, hair, sawdust, etc.

13.Suitable for the ground: flat ground such as marble, tiles, wooden floors, etc. Carpets can’t be used.

Packing List

Host*1,Side brush*2, Cleaning cloth*1, Water tank*,USB charging cable*1,Instructions*1.

Notice:

1.In order to use this product more smoothly, please read it carefully before operation.

2.The hanging water tank mop has relatively large friction. If you use this product on the blanket, please remove the hanging water tank and operate it

3.Due to the light and monitors effect, colors may have lightly difference.

4. Please allow 0.5-1cm errors due to manual measurement. Thank you for your understanding!

Conventional fault handling methods

1. No response when starting up:

A. There is a main switch at the bottom of the sweeper. Please check whether the switch is turned off.

B. The sweeper may be out of power. Please connect the power cord or charging holder to charge for a while before starting the test.

2. After the machine is turned on, it does not move forward and backward or rotate in a straight line:

A. Touch the baffle stuck, pat the baffle with your hand, let the touch switch reset, and then turn it on for trial operation.

B. Wipe the dust on the anti-fall sensor to eliminate the fault.

3. The machine is in trouble and shuts down:

For example, in environments with complex environment and narrow space, the main opportunity to try various methods to get out of difficulties independently. If you can’t get out of trouble, it is recommended to help manually.

4. Unable to charge:

The adapter charging head shall not be less than 5V 1A, and find the corresponding charging power supply to charge the machine.